www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
IV.
Duplicating a drive
When the duplicator powers on, it initializes and goes through the steps below
Shows the firmware version
Initialize SDRAM's status..
Detect Drives' status.
Shows the first function:
Copy HDD copies data directly from the source hard disk to the target hard disk.
Press ENT button to begin copy. The system will auto-detect the hard disks and show the following info on
the LCD.
The LCD will show the following info during the copying process: remaining time, completed percentage.
The copy speed, capacity and time will vary depending on the source hard disk. Once the copying process
is complete the LCD will display the following results.
HD Duplicator
1-1 Ver:
Initialize SDRAM
Detect Drives
Copy-36MBs 0%
235.7GB 1:48
Copy HD
OK:
1.Copy HD
