www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
1. Copy HDD
Make sure that the capacity of the target is equal or larger than the source.
Copies data directly from the source to the target.
Choose option 1 from the menu and press ENT to begin copying. The system will
auto detect the source/target and display info about the copying process. Once
the copying process is complete, the LCD will display Copy OK.
2. Async Copy HDD
Copy HDD copies data directly from the source hard disk to the target hard disks.
While duplication process is on-going, allows you to plug-in additional target drives
and duplication will automatically start for the added target drive.
Choose option 2 and press ENT to begin copying. The duplicator will auto detect
the drive and the LCD will display copying information. If the duplicator detects
that the drive does not have enough capacity, the LCD will display it.
Panel Functions
ENT
ESC
Duplicator Panel
LCD
Scroll Up
Scroll Down
Executes Function
Cancels Function
The Duplicator has 8 functions to choose from:
1. Copy HDD
2. Async Copy HDD
3. Compare HDD
4. Async Compare
5. PreScan Source
6. ReScan BUS
7. Source Size
8. Setup
8-1. Language
8-2. Copy Size
8-3. Startup Menu
8-4. Auto Compare
8-5. Button Sound
8-6. Device Info
8-7. System Info
8-8. Fast Copy
8-9. Auto Start Drive
8-10. Auto Start Timer
8-11. Tolerance Size
8-12. Boot Time Delay
