Addonics Technologies – Jupiter ExDrive User’s Guide v1.0
16
CardBus Driver Installation
For Windows 98, 98SE and Me
1. Power on your system and wait for the Desktop screen.
2. Connect the CardBus/PCMCIA cable and external AC/DC adapter into the
back of your Jupiter ExDrive.
3. Plug the CardBus / PCMCIA card end of the cable into the PCMCIA slot
on the side of your computer.
4. The Add New Hardware Wizard opens identifying the PCI Mass Storage
Controller, click Next.
5. In Wizard “What do you want Windows to do?” select ‘Search for the best
driver for your device,’ click Next.
6. In Wizard , click ‘Specify a location, click Browse button and locate
‘C:\My Documents\CardBus V617\Windows9xME’ folder when the system
prompts for the location of driver disk. Click OK, then click Next.
7. In Wizard “What do you want to install?” select ‘The updated driver
(Addonics CardBus IDE Controller),’ click Next.
8. In Wizard “Windows is now ready to install the best driver…” click Next.
9. When installation is finished, a PCMCIA card icon will appear in the
lower right-hand of the Window’s system tray. Click Finish.
Disk Management for Windows 98
1. Select Start > Setting > Control Panel > System. The System Properties
window opens.
2. Select the Device Manager tab, under Device type, Disk Drives, select your
new hard drive. Click the Properties button.
3. Select the Settings tab and under the Options box, click the Removable
check box. The Reserved drive letters box becomes active. Select the drive
letter for your new drive. Click Ok.
4. Click Yes to restart your system to make changes take effect.
5. Double click My Computer icon and there should be an extra drive letter
for the Jupiter ExDrive drive. You may now access the drive.
