background image

 

 
 
 
 
 
 

Addonics 

T E C H N O L O G I E S  

 

 
 
 
  

Portable Dual Drive RAID Enclosure

 

 

Model:  AE25RDESU 

 

 

 
 
 
 
 

User’s Guide 

 

 
 
 

FCC Warning Statement 

 
This equipment has been tested and found to comply with the limits for a class B digital 
device pursuant to Part 15 of the FCC rules.  These limits are designed to provide 
reasonable protection against harmful interference in a residential installation.  This 
equipment generates, uses and can radiate radio frequency energy.  If not installed and 
used in accordance with the instructions, it may cause harmful interference to radio 
communications.  However, there is no guarantee that interference will not occur in a 
particular installation.  If the equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment on and off, the user 
is encouraged to try and correct the interference by one or more of the following 
suggestions. 
Reorient or relocate the receiving antenna 
Increase the distance between the equipment and the receiver  
Connect the equipment to a different power outlet other than the one where receiver is 
connected 
Consult a certified television or radio technician

 

Enclosure Overview 

 
 

 

 

 

 
 
 

 

 
 
 
 
 
 
 
 
 
 

Removable front door 
with ventilation holes

 

Power and individual drive activity LED

 

RAID Setting 
button

 

Backup

 

Eject for 
Drive 1

 

Eject for 
Drive 2

 

Drive bay 1

 

Drive bay 2

 

Sturdy and heat resistant 
aluminum enclosure

 

eSATA 3Gbps 
connection

 

USB2.0 connection

 

RAID selection switch

 

Power connector for 
5V power adapter 
(AAPAC5V)

 

Power switch

 

Summary of Contents for AE25RDESU









Reviews: