Addonics Technologies ADSA4R5 User Manual Download Page 2

Addonics Technologies Users Guide v1.0 
4-Port SATA II PCI RAID5/JBOD Controller Card 

1

FCC Warning Statement 

 
This equipment has been tested and found to comply with the limits for a  
Class B digital device pursuant to Part 15 of the FCC rules.  These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation.  This equipment generates, uses and can radiate radio 
frequency energy.  If not installed and used in accordance with the 
instructions, it may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular 
installation.  If the equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment on 
and off, the user is encouraged to try and correct the interference by one or 
more of the following suggestions. 
Reorient or relocate the receiving antenna 
Increase the distance between the equipment and th e receiver  
Connect the equipment to a different power outlet other than the one where 
receiver is connected 
Consult a certified television or radio technician

 

 

LIMITED WARRANTY 

Addonics guarantees that every product is free from physical defects in 
material and workmanship during the warranty period specified for each 
product when used within the limits set forth in the Specifications section in 
the user guide. Unauthorized tempering of the product or using it outside the 
scope of the product specifications will result in voiding the warranty. If the 
product proves defective during this warranty period, call Addonics Technical 
Support to obtain a Return Authorization number. BE SURE TO HAVE 
YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. RETURN 
REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF 
PURCHASE. When returning a pr oduct, mark the Return Authorization 
number clearly on the outside of the package and include your original proof 
of purchase. Customers are responsible for paying the shipping and handling 
of the products to Addonics warranty service location. 
IN NO EVENT SHALL ADDONICS’ LIABILITY EXCEED THE PRICE 
PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM 
THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR 
ITS DOCUMENTATION. Addonics makes no warranty or representation, 
expressed, implied, or statuary, with respect to its products or the contents or 
use of the user guide and all accompanying software, and specifically 
disclaims its quality, performance, merchantability, or fitness for any 
particular purpose. Addonics reserves the right to revise or update its 
products, software, or documentation without obligation to notify any 
individual or entity.

Summary of Contents for ADSA4R5





















Reviews: