Additel 762, User Manual

Page: 81 / 139

63
Table 18 Wireless network selection

The port number and physical address are factory settings and cannot be modified.

When the static mode is selected in advanced options, the following table needs to be completed manually.
Table 19 Setup of wireless communication

Click the button at the lower right corner of screen to confirm and save the settings.

The setting of wireless communication will take effect immediately, with no need for confirmation. Click at
the upper right corner of screen, to return to the previous menu.
Subject Valid value Description
WLAN
Open/Close
Open or Close the WLAN
Advancec options DHCP/Static
Select the device address acquisition method
SSID Depends on network environment
Wireless network access point selection
Subject Valid value Description
I/P address
0.0.0.0~255.255.255.255
Set the IP address of calibrator host.
Subnet mask 0.0.0.0~255.255.255.255
Set the subnet mask of calibrator host.
Gateway 0.0.0.0~255.255.255.255
Set the source gateway of calibrator host.