FIG.1
Signal Input Connections
Signal Input (RCA) “
Input
”
Addictive Audio amplifiers have RCA connection type input terminal for low
level input. A standard pair of RCA type cables can be used for all models
(Refer to
Fig. 2)
. Adjustment of input level is accomplished by the gain control. Adjusting this
control allows the amplifier gain to be controlled to match the source unit.
NOTE: For F300.4 set 2CH/4CH switch to “2CH” when running two separate sets
of RCA cables. When running a single pair of RCA cables set 2CH/4CH switch to
“4CH” to allow signal to pass through to all channels.
5
