Addi-Data PC104-PLUS1500 Technical Description Download

Page: 3 / 49

WARNING

The following risks result from improper implementation

and from use of the board contrary to the regulations:

♦

Personal injury

♦

Damage to the board, PC and peripherals

♦

Pollution of the environment

♦

Protect yourself, the others and the environment!

♦

Read carefully the safety precautions

(yellow leaflet).

If this leaflet is not with the documentation, please contact us
and ask for it.

♦

Observe the instructions of the manual.

Make sure that you do not forget or skip any step. We are not

liable for damages resulting from a wrong use of the board.

♦

Used symbols:

IMPORTANT!

designates hints and other useful information.

WARNING!

It designates a possibly dangerous situation.
If the instructions are ignored the board, PC and/or peripheral may
be destroyed.

Summary of Contents for PC104-PLUS1500


















































Search results

Summary of Contents for PC104-PLUS1500

Reviews:

Related manuals for PC104-PLUS1500

Brands by name

Popular brands

Addi-Data PC104-PLUS1500, Technical Description

Search results

Summary of Contents for PC104-PLUS1500

Reviews:

Related manuals for PC104-PLUS1500

Brands by name

Popular brands