Insertion and installation of the board
APCIe-040
3.2
Connecting the accessories
3.2.1
Cable and screw terminal panel
The relay contacts of the board
APCIe-040
are connected to the peripherals via the cable
ST370-16
and the screw terminal panel
PX8001
(see figure below). The digital inputs are also led out over the
50-pin D-Sub male connector of the board.
In terms of electromagnetic compatibility (EMC), the cable
ST370-16
has the following properties:
•
Metallised connector housing
•
Shielded cable
•
Cable shield folded back over insulation and firmly screwed on both sides to the connector
housing.
Fig. 3-4: APCIe-040: Connection to screw terminal panel PX8001
www.addi-data.com 12
