manualshive.com logo in svg

Addi-Data APCI-3000, Technical Description

Share
Download
Addi-Data APCI-3000 Technical Description Download Page 52

Standardsoftware 

APCI-3xxx   

 

52 

Functionality Sample 

number 

Description 

The user selects the timer he wants to use.  
The user defines if the HW gate, the HW trigger and the HW 
output are used. 

 

SAMPLE02 

Initialisation of 1 timer with interrupt. 
The user can trigger the timer by key press. 
The user selects the timer he wants to use.  
The user defines if the HW gate, the HW trigger and the HW 
output are used. 
The user defines the interrupt mode 
(asynchronous/synchronous). 

 

SAMPLE03 

Initialisation of all timers without interrupt.  
The user can trigger the timer by key press.  
The user selects the timer he wants to test.  
The user defines if the HW gate, the HW trigger and the HW 
output are used. 

 

SAMPLE04 

Initialisation of all timers with interrupt. 
The user can trigger the timer by key press.  
The user selects the timer he wants to test.  
The user defines if the HW gate, the HW trigger and the HW 
output are used. 
The user defines the interrupt mode (asynchronous/ 
synchronous). 

Counter 

SAMPLE00 

Shows all counter information 

 

SAMPLE01 

Initialisation of 1 counter without interrupt. 
The user can trigger the counter by key press. 
The user selects the counter he wants to test.  
The user defines if the HW gate, the HW trigger and the HW 
output are used. 

 SAMPLE02 

Initialisation 

of 

1 counter with interrupt. 

The user can trigger the counter by key press.  
The user selects the counter he wants to test.  
The user defines if the HW gate, the HW trigger and the HW 
output are used. 
The user defines the interrupt mode 
(asynchronous/synchronous)   

 

SAMPLE03 

Initialisation of all counters without interrupt. 
The user can trigger the counter by key press. 
The user selects the counter he wants to test. 
The user defines if the HW gate, the HW trigger and the HW 
output are used. 

Summary of Contents for APCI-3000




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands