Addi-Data ADDINUM PA 1500, Technical Description

Page: 68 / 80

Standard software PA 1500
6) i_PA1500_Set8DigitalOutputOff (...)
Syntax:
<Return value> = i_PA1500_Set8DigitalOutputOff
(BYTE b_BoardHandle,
BYTE b_Port,
BYTE b_Value)
Parameters:
BYTE b_BoardHandle Handle of the PA 1500
BYTE b_Port Number of the output port (1 or 2)
BYTE b_Value Output value (0 to 255)
Task:
Resets one or several outputs of one port . Resetting means setting on high.
Example:
b_Port = 1
b_Value = 55 Hex
The outputs 1, 3, 5, 7 are reset.
i
IMPORTANT!
You can use this function only if the digital output memory is ON. See
function i_PA1500_SetOutputMemoryOn (..).
Return value:
0: No error
-1: The handle parameter of the board is wrong
-2: The port number is not 1 or 2
-3: The digital output memory is OFF. Please first use the function
i_PA1500_SetDigitalOutputMemoryOn
7) v_PA1500_Set16DigitalOutputOn (...)
Syntax:
<Return value> = v_PA1500_Set16DigitalOutputOn
(BYTE b_BoardHandle,
LONG l_Value)
Parameters:
BYTE b_BoardHandle Handle of the PA 1500
LONG l_Value Output value (0 to 65535)
Task:
Sets one or several outputs of board PA 1500
68