ADDER ADDERLink XD612, User Manual

Page: 18 / 27

17
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
FUR
THER
INFORMA
TION
INDEX
Receiver video display(s)
Two DisplayPort sockets are provided on
the rear panel of each receiver module. On
XD612 models, video streams 1 and 2 are
presented at the ports. On XD614 models,
either all four possible MST streams are
provided at port 1 OR just the first and
second streams are provided at ports 1 and
2. See page 20 for details about setting
changes.
EDID management
The EDID (Extended Display Identification Data) is read from the connected video
display at the receiver module; it is then transferred to, and stored within, the transmitter
module and then declared to the host computer. If the video display is removed then
the cloned EDID stored at the transmitter module will still be presented to the video
source.
Receiver audio devices
The receiver module can support multiple
analog audio devices, such as stereo
headphones, a mono microphone or line-
level in/out connections.
USB audio is also supported when the left
hand USB socket on the XD rear panel
is connected to the computer. The audio
signals received from the computer will be
transferred to the analog audio sockets on
the receiver. USB audio will take precedence over the 3.5mm audio jacks when both
sources are present.
2 Optionally use the rear panel 3.5mm jack
audio socket to connect line-level audio
devices, such as powered speakers.
VID
LNK
R X
R EC
E IV
E
To stereo headphones
From mono microphone
To speakers
TRANSMITTER
LINK
VIDEO
DISPLAY(S)
USB
DEVICES
AUDIO
DEVICES
POWER
IN
REMOTE
PORT
RECEIVER
2
TRANSMITTER
LINK
VIDEO
DISPLAY(S)
USB
DEVICES
AUDIO
DEVICES
POWER
IN
REMOTE
PORT
RECEIVER
To primary video display
or the first of multiple
MST-compliant displays
1
2
To secondary
video display
To connect the video display
1 Connect the signal cable from your primary
video display to port 1 on the rear panel of
the receiver module.
2 If used, repeat for the secondary video
display on port 2.
To connect audio devices
1 Connect stereo headphones and/or
a mono microphone to the 3.5mm
jack audio sockets on the front
panel of the receiver module.
Note: Digital audio sent via the DisplayPort connectors are passed straight through from the
transmitter to the receiver ports and remain completely separate from the analog audio signals.
Maximum video resolutions
The extenders support the following maximum video resolutions (all at 60 fps):
Fiber (up to 4km) CATx (up to 100m )
XD612 1 display at 1920 x 1200 1 display at 1920 x 1200
2 displays at 1920 x 1200 2 displays at 1920 x 1200
XD614 1 display at 4096 x 2160 1 display at 4096 x 2160
2 displays at 2560 x 1600 2 displays at 2560 x 1600
3 displays at 1920 x 1200 3 displays at 1920 x 1200
4 displays at 1920 x 1200 4 displays at 1920 x 1200