12
inst
A
ll
A
tion
CONFIGURA
TION
OPERA
TION
FUR
THER
INFORMA
TION
INDEX
RX video display
ALIF units support a single high
resolution DVI-D digital video display at
pixel clocks up to 165MHz (equating to
an example display mode of 1920 x 1200
at 60Hz refresh).
DVI-D
To video display
RX microphone & speakers
The ALIF unit can support a microphone
as well as speakers providing the
necessary connections have been made
between the ALIF TX unit and the host
computer.
LINE IN
/
LINE
OUT
CON
SOL
E
MIC IN
Connection from
microphone or line in
from audio device
Link out to speakers
3 Once the unit has been fully connected and powered on, access the RX System
Configuration page to check that the
Audio Input Type
setting matches the connection
that you have made to the port:
line
,
mic
or
mic boost
(the latter pr20dB gain).
To connect a digital DVI video display
1 Connect the lead from the video display to the DVI-D socket on the rear panel of the
ALIF unit.
To connect a microphone (or line in) and/or speakers
1 Connect the lead from a mono microphone or, alternatively, a line in connection from
an audio device to the 3.5mm socket labeled
LINE IN/MIC IN
on the rear panel.
2 Connect the lead from stereo speakers to the 3.5mm socket labeled
line out
on the
rear panel.