ADDAC SYSTEM
page 4
ADDAC810 Assembly Guide : Front pcb and panel
Locate the front pcb
Locate the front pcb and the female headers, solder both at each end of the pcb
Turn the pcb around and place the pot, 2 leds, 2 rca connectors and 2 jacks
Insert the front panel and screw the pot and jack nuts
You can now solder all parts to the pcb.
TIP: When soldering the RCA connectors pull them as close to the panel as possible.
This will allow the RCA jack to go all the way in when plugged in.
