MENU Description
MENU Operation
For any MIDI Configuration the user must get into the CONFIG Menu, this is done by pressing the MODE INFO /
CONFIG push button for 3 seconds, after this the screen will show the first Menu Page:
ASSIGNS:
In this page the user accesses several diferent settings of the 402 and can also Assign the Swing/Assign
input to any parameter.
MIDI GENERAL CONFIG:
This page features most general MIDI settings
MIDI IN CONFIG:
This pages features all settings related with incoming MIDI messages
MIDI OUT CONFIG:
This pages features all settings related with outgoing MIDI messages
Once in the first page the user can use the PRESET MENU / SCROLL Knob to scroll among the Menu options.
Pressing the MODE INFO / CONFIG Button will enter the selected secondary Menu page.
Pressing it once again will Exit the secondary Menu page back to the First page.
Once inside a secondary page the user can scroll its items with the PRESET MENU / SCROLL Knob.
To change a parameter the user can use the Skip Step 3 / MENU -- button to decrease the current value or
use the Skip Step 4 / MENU ++ button to increase the current value. It’s also possible to use the Steps 4 / Set
Value Knob for faster changes.
MIDI Learn:
While inside a secondary menu, the user can also press the Reset 4 / MIDI Learn push button and while
keeping it pressed send a CC message to the 402 MIDI IN. The module will then detect the message and set
the current selected value to the incoming CC number.
MIDI OUT CONFIG
MIDI GENERAL CONFIG
MIDI IN CONFIG
ASSIGNS
Only available with 402B expansion plugged in
Always available
ADDAC402 EXPANSION MIDI GUIDE
January.2017
Revision.01
ADDAC SYSTEM
page 3
Summary of Contents for ADDAC402
Page 1: ......
