4.
Using factory hardware you will bolt your New Venom bumper to the frame. ****You will be
bolting into the threaded holes in the frame*** Align Bumper and tighten bolts.
If you purchased the A.D.D. Venom Tire carrier, Steps 5 & 6 pertain to you.
5.
Remove factory tire carrier. Install A.D.D. tire carrier using factory hardware and 13mm socket.
6.
Place tire extension bracket on carrier and fasten with supplied (6) ½”x1” bolts, (6) ½” nylock
nuts (12) washers.
7.
Step back and enjoy your new A.D.D. bumper.
8.
Check, and re-tighten if needed, all mounting bolts after 100 miles and periodically thereafter.
For additional support or technical questions,
please call 480.671.0820 or
email
