Add-com A10L User Manual Download Page 4

Setup

Safety Instructions

When using your amplifier, these basic precautions will reduce the risk of electric shock, 
acoustic shock and personal injury.
 

• Read and understand all instructions in this manual

 

• Do not open the amplifier housing (excluding the battery compartment), as you 

will void your warranty and expose yourself to potentially dangerous telephony 
voltages.

 

• Disconnect the phone line, and refer to qualified service personnel if:

 

 

-Liquid has been spilled on the unit;

 

 

-The unit has been exposed to rain or water;

 

 

-The unit has been dropped or physically damaged;

 

 

-The unit shows a marked change in behaviour or performance

 

• Disconnect the phone line before cleaning. 

 

• Clean the unit only with a damp cloth, and do NOT use liquid or aerosol cleaners.

 

• Avoid using the phone during electrical storms. There may be a risk of electrical or 

acoustic shock.

 

• Use the unit only with headsets which are certified specifically for telephony 

purposes. Uncertified headsets may not offer adequate protection against electric 
and acoustic shock.

Summary of Contents for A10L













Reviews: