Adcraft coh-2670w Operation Manual Download Page 5

OPERATION  MANUAL                                                                  PAGE 

4

 

Incorrect repairs can cause electrical shock, burns, fire or accidents. 

l

 

Do not disassemble the oven. 

l

 

When removing dirt from the oven, do not use chemicals, such as thinner or benzene. 

l

 

Do not stack the oven by three or more (120Kg (280lb)).   

l

 

Clean the inside daily. 

2. Purpose of Using the Oven 

The oven was designed only to be used baking and reheating purposes. Do not use for other purposes. 

3. Using the Oven 

3.1 Preparations before using   

A. Feet assembly  

l

 

The feet are placed inside the appliance and must be assembled. Do not use the appliance without 
feet.   

l

 

Screw the support feet to the bottom of the appliance. 

l

 

Adjust the appliance height by screwing or unscrewing the feet themselves. 

B. Positioning 

l

 

Install the oven on a flat and solid surface. 

C. Remove the protective film. 

D. Take out the tray from the body and wash it. 

E. Wipe the inside and outside of the oven with a damp cloth. Then, wipe with a dry cloth. 

F. Electrical connection 

l

 

Before connecting make sure that the voltage and the frequency correspond to that stated on the rating 

plate on the appliance. 

l

 

Place a bi-polar switch between the appliance and the network accessible after installation, whose 

contacts have a minimum opening distance of 3mm, with an appropriate input. 

l

 

The appliance must be connected to the ground line of the network. 

l

 

The conductor must have a minimum section of 10 mm

2

l

 

Connect the power cord to the electrical outlet. Be sure the power cord is strongly kept in position. 

3.2 Instruction for Use 

3.2.1 How to use Timer 

A. Set the time switch knob to the number which indicates the cooking time required by  the food you are 

going to cook. 
B. Set the timer by turning it clockwise. The oven will turn off automatically at the end of the selected time 

and a bell will ring. 
C.The oven can be turned off manually during cooking by turning the timer counter-clockwise to the “0” 

position. 

3.2.2 Convection cooking 

A. Turn on the power to the oven. 
B. Set the temperature control to the desired temperature (0-570°F).   
C. Turn the timer to the desired time  (0-120min). The temperature light, timer light, and the inside lamp are 

Summary of Contents for coh-2670w











Reviews: