Adcon A440, Technical Reference Manual

Page: 39 / 47

53
Commands
FREQ
DESCRIPTION
Sets/returns the operating frequency.
PARAMETERS
The operating frequency and step (Hz), or none in the GET version.
RETURNS
The actual frequency and step, in Hz.
REMARKS
GET/SET .
REMOTE
Yes, SET only.
EXAMPLE FREQ 433925000 25000
193 FREQ 0
#
FREQ
193 FREQ 433925000 25000 0
#
DATA
DESCRIPTION
Returns data stored for a certain device.
PARAMETER
The ID of the device for which the data is requested and the date/time (in the stan-
dard format) the data was stored. If missing, it refers to the data of the local device.
RETURNS
A data block.
REMARKS
GET only. If the date/time parameter is not included, the latest data is returned. If
the date/time parameter is included, the date and time closest to, but later than, the
given date/time is returned.
REMOTE
Yes, for a GET , but only one frame at a time. The A440 implements only the remote
version.
EXAMPLE
DATA 193 12/12/1998 12:12:12
193 DATA b1 b2 b3 ... bn 0
#
The data block returned will typically contain a number of data frames (telegrams).
The structure of a block is as follows:
dd mm yyyy hh mm ss si ft d1 d2 ... dn dd mm yyyy ... dn cs
where:
•
dd mm yyyy
is the date
•
hh mm ss
is the time
•
si
is the size of the frame
•
ft
is the frame type
•
d1 d2 ... dn
are the data values (the frame content)