| ADCOM GDV-850 Owner’s Manual
16
17
ADCOM GDV-850 Owner’s Manual |
GDV-850 Command Set
E. Echo:
Enable/Disable command
echo (Power-up default = Enabled)
Syntax: “E”, <char>
Returns: “1”, “E”, <CR>, <LF>, “>” (if
Enable command received)
Where: <char> is expressed as an ASCII
value “1” = Enable & “0” = Disable
P. Power:
On / Standby / Status
Syntax: “P”,<char>
Returns: <char>,“P”, <CR>, <LF>, “>”
Where: <char> is expressed as an
ASCII value; “1” = On, “0” = Standby,
and “2” = Request for Power Status
(returns “1” or “0”)
R. Remote:
Issue a Remote Control
Command.
Syntax: “R”, <char1>, <char2>
Returns: “R”,<CR>,<LF>,”>” (i.e. 0x52,
0x0D, 0x0A, 0x3E)
Where: <char1> & <char2> are
expressed as ASCII ‘hexadecimal’ val-
ues per the following table.
R 20 (i.e. 0x52, 0x32, 0x30) = OPEN/CLOSE
(EJECT)
R 21 (i.e. 0x52, 0x32, 0x31) = SETUP
R 22 (i.e. 0x52, 0x32, 0x32) = PLAY BACK
CONTROL
R 23 (i.e. 0x52, 0x32, 0x33) = 0
R 24 (i.e. 0x52, 0x32, 0x34) = 1
R 25 (i.e. 0x52, 0x32, 0x35) = 2
R 27 (i.e. 0x52, 0x32, 0x37) = 4
R 28 (i.e. 0x52, 0x32, 0x38) = 5
R 29 (i.e. 0x52, 0x32, 0x39) = 6
R 2A (i.e. 0x52, 0x32, 0x41) = 7
R 2B (i.e. 0x52, 0x32, 0x42) = 8
R 2C (i.e. 0x52, 0x32, 0x43) = 9
R 2D (i.e. 0x52, 0x32, 0x44) = +10
R 2F (i.e. 0x52, 0x32, 0x46) = CLEAR
R 30 (i.e. 0x52, 0x33, 0x30) = SLOW
R 31 (i.e. 0x52, 0x33, 0x31) = PAUSE/STEP
R 32 (i.e. 0x52, 0x33, 0x32) = STOP
R 33 (i.e. 0x52, 0x33, 0x33) = TITLE
R 34 (i.e. 0x52, 0x33, 0x34) = FAST FORWARD
R 35 (i.e. 0x52, 0x33, 0x35) = PREVIOUS
R 36 (i.e. 0x52, 0x33, 0x36) = SELECT
NTSC/PAL TOGGLE
R 37 (i.e. 0x52, 0x33, 0x37) = SELECT NTSC
R 38 (i.e. 0x52, 0x33, 0x38) = SELECT PAL
R 39 (i.e. 0x52, 0x33, 0x39) = NEXT
R 3C (i.e. 0x52, 0x33, 0x43) = NAVIGATE LEFT
R 3D (i.e. 0x52, 0x33, 0x44) = NAVIGATE DOWN
R 60 (i.e. 0x52, 0x36, 0x30) = ANGLE
R 61 (i.e. 0x52, 0x36, 0x31) = SUB-TITLE
R 62 (i.e. 0x52, 0x36, 0x32) = AUDIO
R 63 (i.e. 0x52, 0x36, 0x33) = MENU
R 64 (i.e. 0x52, 0x36, 0x34) = NAVIGATE UP
R 65 (i.e. 0x52, 0x36, 0x35) = POWER
ON/OFF TOGGLE
R 68 (i.e. 0x52, 0x36, 0x38) = NAVIGATE RIGHT
R 69 (i.e. 0x52, 0x36, 0x39) = POWER ON
R 6A (i.e. 0x52, 0x36, 0x41) = POWER OFF
R 6C (i.e. 0x52, 0x36, 0x43) = BITSTREAM
ON
R 6D (i.e. 0x52, 0x36, 0x44) = BITSTREAM
OFF
R 6F (i.e. 0x52, 0x36, 0x46) = IRE 0
R 70 (i.e. 0x52, 0x37, 0x30) = IRE 7.5
R 71 (i.e. 0x52, 0x37, 0x31) = PLAY
R 72 (i.e. 0x52, 0x37, 0x32) = DISPLAY
R 73 (i.e. 0x52, 0x37, 0x33) = ZOOM
R 74 (i.e. 0x52, 0x37, 0x34) = GOTO
R 75 (i.e. 0x52, 0x37, 0x35) = RESUME
R 76 (i.e. 0x52, 0x37, 0x36) = RGB
OUTPUT
R 77 (i.e. 0x52, 0x37, 0x37) = COMPONENT
OUTPUT
R 78 (i.e. 0x52, 0x37, 0x38) = VIDEO
ON/OFF TOGGLE
R 79 (i.e. 0x52, 0x37, 0x39) = MUTE
R 7A (i.e. 0x52, 0x37, 0x41) = REPEAT 1/ALL
R 7B (i.e. 0x52, 0x37, 0x42) = REPEAT A-B
R 7C (i.e. 0x52, 0x37, 0x43) = FAST
REVERSE
R 7F (i.e. 0x52, 0x37, 0x46) = 3
S. Status:
Request I/O status information.
Syntax: “S”
Returns: <char1>, <space>, <char2>,
<space>, <char3>, <space>, <char4>,
<space>, <char5>, <space>, <char6>,
<space>, <char7>, <space>, <char8>,
<space>, ”S”, <CR>, <LF>, ”>”
Where: <char1> ~ <char8> = the ASCII
‘binary’ value representing the status
of the GDV-850 according to the fol-
lowing table.
char1 POWER ON: 1 = Unit is Powered
UP, 0 = Unit is Powered Down
char2 STANDBY: 1 = Unit is in Standby
mode, 0 = Unit is out of Standby
char3 VIDEO OFF: 1 = Video is OFF, 0 =
Normal operation
char4 AUDIO OFF: 1 = Audio is OFF
(mute), 0 = Normal operation
char5 DIGITAL OUT: 1 = SPDIF output is
ON, 0 = SPDIF output is OFF
char6 HDCD: 1 = HDCD disk playing, 0
= Not HDCD
char7 DVD AUDIO: 1 = DVD Audio disk
playing, 0 = Not DVD Audio
char8 P-SCAN: 1 = Video format 480p,
0 = Video format 480i
V. Version:
Request firmware version
information.
Syntax: “V”
Returns: “v”,<n1>,<n2>,<CR>,<LF>,”>”
Where: <n1> and <n2> are ASCII char-
acters indicating the firmware revision
level.