8250A Optical Power Meter Operation Manual
1.15 Product Disposal and Recycle
1-17
1.15 Product Disposal and Recycle
This product should be disposed of according to the regulations and laws that are established by your country
and municipality.
When treating this product, separately collect components according to this chapter to prevent the spread of
substances, which may be harmful to humans, and to protect the global environment.
Components, which must be separately collected, are shown in Table 1-7.
The treatment of this product should comply with the relevant laws of your country and waste-disposal reg-
ulations of your company.
Table 1-7 Disposal (1 of 2)
Substance/Component
Used/
Not used
Location
Unit
Component
Quantity
if full
configuration
Polychlorinated biphenyls
(PCB) contained in capaci-
tors
Not used -
-
-
-
Mercury contained in com-
ponents
Not used -
-
-
-
Batteries
Not used -
-
-
-
Printed circuit boards
Used
Main frame BPL-033316
BLC-031485
Printed circuit board
Printed circuit board
1
1
Toner cartridges
Not used -
Plastic containing bromi-
nated flame retardants
Used
Main frame BPL-033316
BLC-031485
Connector, coil,
diode, FET, logic IC,
FLASH, and transis-
tor
11
Asbestos waste and com-
ponents which contain
asbestos
Not used -
-
-
-
Cathode ray tubes
Not used -
-
-
-
Chlorofluorocarbons
(CFC), hydrochlorofluoro-
carbons (HCFC), hydroflu-
orocarbons (HFC) or
hydrocarbons (HC)
Not used -
-
-
-
Gas discharge lamps
Not used -
-
-
-
Liquid crystal displays of a
surface greater than 100
square centimeters
Not used -
-
-
-
External electric cables
Used
Main frame Accessories
Power cable
1
Components containing
refractory ceramic fibers
Not used -
-
-
-
