ADC Modem MM701G, User Manual

Page: 16 / 108

Setting Up the PC
10 MM701G User Manual
S
ETTING
U
P THE
PC
To access the modem Web interface, set up your PC on the same LAN IP subnet as the
MM701G. The default LAN IP subnet for the modem is 10.0.0.0 with a subnet mask of
255.255.255.0.
However, if you have an existing subnet to accommodate the modem, change the IP address of
the modem from the command-line interface as described in
“Setting Up the LAN” on page 48 .
The following is an example of how to set up a PC running Microsoft Windows 98.
1 From the Windows desktop, click Start , Settings , Control Panel to open
the Control Panel dialog.
2 From the Control Panel dialog, double-click the Network icon.
3 From the Configuration tab, double-click TCP/IP .
If your PC cannot connect to the modem, set your PC Ethernet NIC card for 10 Mbps
half-duplex transmission (not auto-detect).