Installation
150-419-100-03>
12
September 25, 1998
HRU-419 List 1
I
NSTALLING
THE
HRU-419
The HRU-419 mounts in an STS-3192 High Density shelf or in equivalent
card shelves manufactured by ADC Telecommunications (HHS-319,
HMS-317 and HMS-308).
To install the HRU-419 (
), Set the user options as described in the
following:
1
Slide the HRU-419 into the card guides for the desired slot, then push the
unit into the enclosure until it touches the backplane card edge connector.
Figure 3.
HRU-419 Installed in a Card Shelf
2
Push the unit into the card edge connector until it is entirely within the
card guide, indicating that the unit is properly seated.
HRU-419
Card shelf
