ADC ECOWASH-MP2, User And Maintenance Manual, Page: 21 / 34

113688- 1 21
With the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys the display contrast
can be changed. Press the ESC key to return to the
OPTIONS screen. Press ENTER to select the desired
contrast.
Double drain?
→
NO
YES
3.3.2 Double drain:
If the machine is equipped with this option*, the double
drain should be activated. Fixed programs do not vary
(drain no 1) but a new option appears in programming
(drain no 1/drain no 2) to program** different drains and
reuse the clean water in the rinse cycles. This option is
only activated if the second drain is fitted.
* To obtain a double drain, please consult your usual
dealer.
** Please see the programming manual.
3.3.3 Eliminate advance
Eliminate advance?
→
NO
YES
If the advance is eliminated, it will not be possible to
advance any program while running, and programs may
only be started from the first cycle.
3.3.4 Restricted access:
This option serves to prevent unwanted handling of the
machine.
Access restricted
→
NO
YES
If YES is selected, enter the required code:
ENTER CODE
0000
Now the pre-established level “Low” (130 mm) can be
modified within the values “Minimum”(110 mm) and
“Medium” (170 mm) using the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys.
For a greater margin of movement, the adjacent levels
should also be modified.
If we select the option, Reset Levels, the water levels
will automatically return to the manufacturer’s pre-
established levels.
3.3.6 Laundrette message:
The welcome message can be configured. This
message appears after the model and software version
when the machine is switched on. If this option is
selected:
CHANGE LEVELS
Low: 130mm
Use the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys to select the level
you wish to modify and use the ENTER key to enter the
level. The following screen is displayed:
→
Minimum: 110mm
Low: 130mm
Medium: 150mm
High: 170mm
Maximum: 180 mm
Reset levels
Keep password in a safe place for use in subsequent
configurations.
IF THE CODE IS LOST IT WILL NOT BE POSSIBLE
TO RETURN TO THE CONFIGURATION MENU
3.3.5 Change levels:
The pre-established water levels for the washing
machine can be modified within certain limits. The levels
depend upon the model of washing machine; a minimum
safety level is established for all models. It’s 40mm for
the EWH25, 30, and 40; 20mm for the EWH60.
Use the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys to change the digit
selected and ADVANCE to change to the next digit. After
entering any digit, press RETURN to correct. After
entering all the digits, press ENTER and repeat
password as requested:
ENTER CODE
0000