manualshive.com logo in svg

ADC Digivance, Installation And Operation Manual, Page: 27 / 34

Share
Download
ADC Digivance Installation And Operation Manual Download Page 27

ADCP-75-110 

•

 Issue 2B 

•

 July 2001 

Page 19 

©

 2001, ADC Telecommunications, Inc. 

2.3  

Powering  Requirements 

2.3.1  DHU and DEU Powering  

The

  DHU  and  DEU  are  powered  by  120–240  Vac  (50–60  Hz)  which  is  supplied through a 

standard

 three-conductor AC power cord. The 120 Vac power cord is provided with the unit 

and

 is 98 inches (2.5 m) long. Both the DHU and the DEU have a current rating of 2.0 Amps 

at

 120 Vac input. Locate each unit so that an AC outlet is within the reach of the power cord.  

If

  back-up  powering  is  required,  it  is recommended that the building Uninterruptible Power 

Supply

 (UPS) system be used to provide back-up power to the DHU and DEU in the event of 

an

 AC power outage.  

2.3.2  DRU Powering  

The

 DRU is powered by 48 Vdc power which is supplied to the DRU through the front panel 

RJ-45

 connector. Power to the DRU may be provided by the DHU, DEU, or by a 120 Vac to 

48

  Vdc  power  converter  (available  separately  as an accessory item) plugged into a properly 

grounded

 120 Vac outlet. The DRU has a current rating of 350 mA at 48 Vdc input.  

If

 the DRU will be powered by the DHU or DEU, the power cable must be fabricated on-site by the 

installer.

  Use  category  3  or  5  twisted  pair  cable  as  the  power  supply  cable  when  the  DRU  is 

powered

  by  the  DHU  or  DEU.  The  maximum  recommended  length  of  the  power  cable  is  500 

meters.

 If the DRU will be located more than 500 meters from the DHU or DRU, the DRU must be 

locally

 powered by a 48 Vdc power converter. Route the power cable between the power source and 

the

 DRU. Terminate both ends of the power cable with a male RJ-45 connector.  

The

  DRU  may  be  powered  locally  by  the  ac/dc  converter,  shown  in  Figure  10,  which  is 

available

  as  an  accessory  item.  The  converter  is  a  UL  Listed  stand  alone  Limited  Power 

Supply

 (LPS) unit with a rated output of 48 Vdc at 1.2 Amps. The converter is equipped with 

a

  6-foot  (1.8  m)  DC  power  cable  which  is  terminated  with  an  RJ-45  male  connector.  The 

converter

 is powered by 120–240 Vac (50–60 Hz) power which is supplied though a standard 

three-conductor

  AC  power  cord.  The  120  Vac  power  cord  is  6  feet  (1.8  m)  long  and  is 

provided

 with the converter.  

15988-A

 

Figure 10. AC/DC Power Converter 

Summary of Contents for Digivance



































Reviews:

No comments