background image

A Special

Thank You...

Thank you for choosing an ADC

®

Diagnostix

TM

e-sphyg

TM

blood

pressure instrument. We're proud of the care and quality that
goes into the manufacture of each and every item that bears our
name.

Only the finest materials are used to assure you of a timeless
instrument designed for optimum performance.

You'll quickly appreciate the results; for you now own one of the
finest sphygmomanometers that money can buy.

With proper care and maintenance, your ADC blood pressure
instrument is sure to provide you with many years of depend-
able service.  Please read the following instructions and general
information, which will prove helpful in allowing you to enjoy
your ADC product.

Thank you for your patronage.  It is indeed our pleasure to serve
you. 

Sincerely,
American Diagnostic Corp.

©2005 AMERICAN DIAGNOSTIC CORP.

NAME/FUNCTION OF PARTS

Gauge Hang

Tab

Arm Cuff

Gauge

Backlight

Button

On / Off

Zeroing Button

Artery Mark

Air Tube and

Connector

Air Release Valve &

Inflation Bulb

Error Message:

Description:                   Solution:

ERROR MESSAGES

Err

Heartbeat rate

detection error.

The cuff was deflated
too rapidly. Keep the

deflation rate at

about 2-3 mmHg

per second.

EE

Press the “     ” button

to switch the unit off,

or the unit will auto-

matically switch off

after 60 seconds.

E3

Data Error.

Remove and rein-

sert the batteries. If

this error keeps

occurring, return

the device to your

local distributor or

service center. 

0I

The cuff was inflated

to a pressure over

300 mmHg.

Open the valve
immediately to

rapidly exhaust the

air in the cuff.

A Pressure of over

15mmHg remaining

for more than

3 minutes is detected.

 

 

 

 

 

 

Summary of Contents for Diagnostix e-sphyg







Reviews: