Local Configuration
LTPS-UM-8013-03
28
August 30, 2002
D3LX CO and RMT Modules
V
IEWING
L
OOPBACK
S
TATUS
AND
P
ERFORMING
L
OOPBACK
C
OMMANDS
Use this procedure to view loopbacks and send loopback
commands for a specific D3LX system.
1
From the Main menu, select
6. System Maintenance
.
2
From the System Maintenance menu, select
4. Loopback Status Commands
.
3
From the Loopback Status/Commands menu, select
1. High/Low Speed Loopback
Status/Commands
(as shown in
) to view the status of current loopbacks and to enable new
loopback tests for low-speed modules and their associated components.
4
Use
, , , ,
and
to select the group and slot to display, populate each data field according
to your requirements, then assign the selections by pressing
.
Figure 16.
Loopback Status and Commands
6. System Maintenance
4. Loopback Status Commands
1. High/Low Speed
tatus Commands
Loopback
S
SPACEBAR
← → ↓
↑
ENTER
