Setting Up System Options
LTPS-UM-8013-03
22
August 30, 2002
D3LX CO and RMT Modules
N
AVIGATING
T
HROUGH
C
RAFT
I
NTERFACE
M
ENUS
Many of the operations that follow require the use of the craft interface.
To select a menu from the craft interface, do one of the following:
•
Press the number of the menu.
•
Use the
arrow keys to select the menu and press
.
summarizes the navigational keys, which are also listed in the on-screen Help menu.
Table 4.
Navigational Keys for the Craft Interface Screens During Telnet Sessions
Key
(a)
(a) Legacy management units require the use of control keys instead of arrow keys.
Function
Cycles through selections.
Activates the current setting or choice, or display a menu.
Returns to the previous menu.
Selects the line or item above the current one.
Selects the line or item below the current one.
Selects the next page or item to the right of the current one.
Selects the previous page or item to the left of the current one or returns to the previous menu.
Menu number
Selects the menu or item.
+
Returns to Main menu.
+
Returns to previous menu.
+
Terminates the session (logout).
+
Displays the Help menu.
+
Jumps to Active Alarm menu.
+
Jumps to Shelf Status screen.
+
Refreshes the screen.
Most VT100 emulation programs support a print screen option. For Windows-based programs,
such as Procomm or HyperTerminal, see the Help menu for instructions.
← →
ENTER
SPACEBAR
ENTER
ESC
↑
↓
→
←
CTRL
T
CTRL
P
CTRL
D
CTRL
A
CTRL
E
CTRL
G
CTRL
R