ADC AVIDIA SWD4573I1, User Manual

Page: 525 / 658

Chapter 24: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 499
To modify RIP information:
1 In the RIP Configuration Table window, click .
The Modify RIP Configuration window opens.
2 To modify the Send mode in the Send box select the desired setting ( Do Not Send , RIP Version
1 , RIP1 Compatible , RIP Version 2 ).
3 To modify the Receive mode, in the Receive box select the desire setting ( RIP 1 , RIP 2 , RIP
1 or RIP 2 , Do Not Receive ).
4 To modify the hop count, in the Hop Count box type the number of hops the packets are
allowed to cross before arriving at their destination.
5 To modify the authentication type, in the Authentication Type box, select the desired setting
( No Authentication or Simple Password ). You can only set the authentication type to Simple
Password if you are using a Send or Receive mode that supports RIP 2.
The authentication type determines whether a password is required for the router to learn
information from the session ports in the same network segment.
6 If you selected No Authentication in Step 5 , go to Step 8 .