14
To set the date, begin with the year. The 4 characters
1.
(2014) on the screen will blink. You can change the year
by pressing the «
MEMORY
» button. To confirm and set
the year, press the «
TIME
» button.
The device will automatically advance to the month.
2.
To change the month, use the «
MEMORY
»
button. To confirm and set the month, press
the «
TIME
» button.
To set the day, hour, and minutes, use the same
3.
steps. Push the «
MEMORY
» button to change the
display value. Press the «
TIME
» button to confirm
and set the value.
Once you have set the minutes and pressed the «
TIME
» button,
4.
the date and time are set and the time is displayed.
NOTE
If you want to change date and time, press and hold the «
TIME
» button
•
down for approx. 5 seconds until the user icon flashes. Press the
«
TIME
» button again, and then you can enter the new values as
described above.
A single press of the «
MEMORY
» button or «
TIME
» button advances
•
one operation.
Holding the button down speeds up the procedure.
•
5.5. Select the User
This blood pressure monitor is designed to store
99 measurements for each of two users. Before
taking a measurement, be certain that the correct
user has been selected.
With the unit off, press and hold the «
TIME
»
a)
button until the user icon starts blinking.
Press the «
MEMORY
» button to toggle between users.
b)
Press the «
ON/OFF
» button to make your selection.
c)
