ADC 410F, User Manual

Page: 14 / 106

Requirements for your System
6 Megabit Modem 410F and 420F User Manual
If you need to store the modem for a prolonged period, store it in the original antistatic bag and
packaging. Observe environmental specifications as stated on
page 76 .
R
EQUIREMENTS FOR YOUR
S
YSTEM
You need the following hardware and software to complete the installation and configuration of
the Megabit Modem 410F or 420F:
• PC with an Ethernet Network Interface Card (NIC)
• TCP/IP network protocol stack (see the documentation for your operating system)
• Web browser installed such as Netscape
®
or Internet Explorer
®
Version 4.0 or higher
• Ethernet hub (optional)
R
EQUIREMENTS FOR THE
I
NSTALLATION
S
ITE
You must select the locations to install the Megabit Modem 410F and 420F. You can install
modems either:
• placed on a flat surface (shown on page 7 )
• mounted on a wall (shown on page 8 )
Your facility must have the following minimum site requirements to install each modem:
• power outlet
• RJ-11 wall jack with DMT ADSL service (you provide)