background image

 

 LTPH-TP-1047-01, Issue 1

ii

March 12, 2001

 H2TU-R-402 List 5E

Revision History of This Practice

To order copies of this document, use catalog number LTPH-TP-1047-01.

Copyright

March 12, 2001 

©Copyright 2001 ADC DSL Systems, Inc. All rights reserved.

Trademark Information

ADC and Soneplex are registered trademarks of ADC Telecommunications, Inc.

HiGain is a registered trademark of PairGain Technologies, Inc. No right, license, or interest to such trademarks is granted 
hereunder, and you agree that no such right, license, or interest shall be asserted by you with respect to such trademark.

Other product names mentioned in this practice are used for identification purposes only and may be trademarks or registered 
trademarks of their respective companies.

Disclaimer of Liability

Information contained in this document is company private to ADC DSL Systems, Inc., and shall not be modified, used, copied, 
reproduced or disclosed in whole or in part without the written consent of ADC.

Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. 
In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits, and ADC further 
disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of 
liability applies to all products, publications and services during and after the warranty period.

Issue

Release Date

Revisions Made

1

March 12, 2001

Initial release.

Summary of Contents for 150-2450-55





















































Reviews: