ADC 150-2248-01 User Manual Download | Manualshive

Page: 45 / 74

background image

150-432-100-02, Revision 02

Provisioning

HLU-432 List 1

July 18, 2002

37

To display the circuit Help diagram (

), press

. The symbol legend used to describe all circuit events

and the corresponding troubleshooting tips are located beneath the Help diagram. A troubleshooting symbol on
the diagram identifies the location of a problem.

Those legend symbols which appear in parentheses are also keyboard commands for obtaining additional
information.

•

Press

to display margin values for the circuit. (

Figure 23 on page 38

)

•

Press

to display the insertion loss values for the circuit. (

Figure 24 on page 38

The Troubleshooting screens use the following navigational keyboard commands:

•

Press the

(Help),

(Margin Values), or

(Insertion Loss) toggle keys to enter or exit the respective

troubleshooting screen.

•

Press

to return to the Maintenance Terminal Main Menu.

•

Press

to return to the main Troubleshooting screen from the Help, Margin Values or Insertion Loss screens.

•

Press

to update a screen.

•

Press

to automatically update the screen. (Press

again to deactivate automatic update.) The

Troubleshooting screen indicates whether AutoUpdate is on or off.

•

Press

to directly access the Loopback menu (see

“Loopback Mode Screen” on page 25

Figure 22.

Troubleshooting with Help

H

M

I

H

M

I

E

B

U

A

A

L

TIME: 11:01:51               TROUBLESHOOTING with HELP
DATE: 04/14/00                 CIRCUIT ID#:
        ___         ___         ___         ___         ___         ___
       |   |   1   |   |   1   |   |   1   |   |   1   |   |   1   |   |
   >>>>|   |=======|   |=======|   |=======|   |=======|   |=======|   |>>>>
   <<<<|   |=======|   |=======|   |=======|   |=======|   |=======|   |<<<<
       |___|   2   |___|   2   |___|   2   |___|   2   |___|   2   |___|
NTWK   HLU         HDU1        HDU2        HDU3        HDU4        HRU   CUST

SYSTEM OPERATIONAL

SYMBOLS  DESCRIPTIONS              TROUBLESHOOTING
  ) (    Loopback                  ) - Network loopback; ( - Customer loopback
   X     HDSL loop not in sync     Bad connection
  (M)    Low Margin Alarm          Poor HDSL signal, long loop, interference
  (I)    High Insertion Loss       Long loops, bridged taps
  (C)    HDSL Errored Second       Shorts, interference, noise
  (N)    HDSL Unavailable Second   Shorts, interference, noise
   R     Channel Reversal          Channel Reversal nearest HLU is displayed
E(R)R   DS1 Errored Second        Errors include BPV, framing and CRC
L(O)S   DS1 Unavailable Second    Loss of T1 signal
  AIS    Alarm Indication Signal   Far end LOS, HDSL LOSW, loopbacks or MAL

AUTOUPDATE OFF (E)xit (A)uto(U)pdate (B)ack (L)oopbacks

«
...
43
44
45
46
47
...
»

Summary of Contents for 150-2248-01











































































Reviews:

No comments

Related manuals for 150-2248-01

Vb-C60 - Ptz Network Camera

Brand: Canon Pages: 30

WS-650 lite Series

Brand: Laurell Pages: 84

Brand: Stanwax Laser Pages: 9

nForce 680I LT SLI

Brand: Nvidia Pages: 80

Brand: CAP-XX Pages: 8

Brand: 3Ware Pages: 4

PBE-5AC-300-ISO

Brand: Ubiquiti Pages: 28

Extreme Gaming VGA Cooler GV1000

Brand: ZALMAN Pages: 7

Brand: ZALMAN Pages: 9

airHaul Nexus sB3010

Brand: SmartBridges Pages: 80

Brand: Zoom Pages: 31

Brand: Dataprobe Pages: 16

FireWire 800 ExpressCard 34

Brand: LaCie Pages: 24

Brand: Renesas Pages: 67

IntraSwitch 5324MT

Brand: Asante Pages: 2

Brand: Tripp Lite Pages: 2

Brand: AMG Pages: 4

Brand: Infoblox Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands