ADC 150-2248-01 User Manual Download | Manualshive

Page: 21 / 74

background image

150-432-100-02, Revision 02

Provisioning

HLU-432 List 1

July 18, 2002

13

Maintenance Terminal Main Menu

shows the Maintenance Terminal Main Menu from which you can access system administration screens.

The function of each screen selection is listed in

. To access a screen, press the letter shown next to the

menu item.

Figure 3.

Maintenance Terminal Main Menu

Table 4.

Maintenance Terminal Screens

Press
Key

To View Screen

Screen Description

See page:

View Span Status

Provides access to subscreens that allow you to monitor the HDSL and T1
line status between the HLU and the HRU.

Set Clock

Allows you to set both the time and the date parameters at the HLU and to
update the same settings at the HRU.

System Settings

Allows you to set all user options.

Loopback Mode

Provides access to a subscreen that allows you to enable and disable
loopbacks at both the network and customer side.

View Performance Data

Provides access to subscreens that allow you to view the Errored Seconds
(ES) and Unavailable Seconds (UAS) between the HLU and the HRU in
15-minute intervals over a 4-hour time period per screen for a total of
24 hours (6 screens).

View Performance History

Provides access to subscreens that allow you to view the ES and UAS
between the HLU and the HRU in 24-hour intervals over a 31-day period.

View Alarm History

Provides access to subscreens that allow you to view alarm conditions
between the HLU and the HRU.

View System Inventory

Allows you to enter a unique circuit ID (up to 24 alphanumeric
characters).

View Troubleshooting

Provides a graphical analysis of the circuit and identifies problem areas

HI-GAIN HLU-432 MAINTENANCE TERMINAL MAIN MENU (ver V7.3L-1)
CIRCUIT ID#:

                         A. VIEW SPAN STATUS
                         B. SET CLOCK
                         C. SYSTEM SETTINGS
                         D. LOOPBACK MODE:  NONE
                         E. VIEW PERFORMANCE DATA
                         F. VIEW PERFORMANCE HISTORY
                         G. VIEW ALARM HISTORY
                         H. VIEW SYSTEM INVENTORY
                         I. VIEW TROUBLESHOOTING

A

B

C

D

E

F

G

H

I

«
...
19
20
21
22
23
...
»

Summary of Contents for 150-2248-01











































































Reviews:

No comments

Related manuals for 150-2248-01

Brand: ZALMAN Pages: 20

Brand: QNAP Pages: 20

Brand: Supero Pages: 68

Brand: LevelOne Pages: 31

Active Module Carrier VX402C-64

Brand: C&H Pages: 32

Fan Tray 8820-S2-900

Brand: Paradyne Pages: 6

Brand: Xmart Pages: 8

Brand: Marani Pages: 39

Brand: Arduino Pages: 25

SRA311-008P8 Series

Brand: Divio Pages: 4

Sinus 154 data II

Brand: T-COM Pages: 12

Brand: MSNswitch Pages: 2

Brand: Digital Equipment Pages: 90

Brand: Qlogic Pages: 2

Brand: PairGain Pages: 48

Brand: Trend Micro Pages: 2

BPN-SAS3-116A-N10

Brand: Supermicro Pages: 8

Brand: ZALMAN Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands