Installing a Management Unit (HMU)
800-357-104-01, Revision 01
30
September 29, 2000
HMS-357 List 4 and List 5
Setting the HMU Date and Time (Option H)
Setting the Shelf Identifier (Option D)
Setting the HMU date and time will globally configure these parameters for all HLU-319s in the
system. The HMU-319 List 7A will also globally update the time and date settings for the HXUs in the
chassis.
Step
Procedure
Installer Check
ü
ü
ü
ü
1
Press
and then press
to select Change HMU Date and Time.
H
2
At the prompt, enter the current date using MM/DD/YY format, and then press
.
H
3
At the prompt, enter the current time using HH:MM 24-hour format, and then press
.
H
4
Press
to exit the screen and return to the Shelf Status menu.
H
5
Proceed to
“Setting the Shelf Identifier (Option D)” on page 30
H
Installer Signature
?
?
?
?
Date
Step
Procedure
Installer Check
ü
ü
ü
ü
1
From the Shelf Options menu, press
and then press
to select Shelf ID.
H
2
At the prompt, enter a text string of 32 alphanumeric characters or less to identify the shelf, and then
press .
The Shelf Identifier may be set to any value, but must be unique for each shelf in the network.
H
3
Press
to exit the screen
.
H
4
Press
to confirm, save the setting, and return to the Shelf Status menu.
H
5
“Setting the Local IP Address (Option A)” on page 31
.
H
Installer Signature
?
?
?
?
Date
H
ENTER
ENTER
ENTER
X
D
ENTER
ENTER
X
Y
