Installation
LTPH-TP-1003-02, Issue 2
6
June 1, 2001
HRE-206 Lists 1 and 2
3
Use the backplate as a template to mark the wall locations for drilling the mounting holes (
.
Figure 6.
HRE-206 Backplate
4
Drill pilot holes and attach the backplate to the backboard with the four No. 10 x
5
/
8
-inch sheet metal screws
and washers supplied with the remote enclosure.
5
Attach the remote enclosure to the backplate. To allow the enclosure to hinge either up or down, remove the
bottom or top retaining screws respectively.
.
6
Rotate the main chassis back into position and replace the retaining screws (
).
Figure 7.
Wall Mounting and Bottom-Hinged View
When the main chassis is attached to the backplate, it can be rotated up or down to provide
access to the backplane connector and other internal areas. See
for hinging details.
0.00"
Mounting holes
Mounting holes
CPE
1
CPE
2
CPE
3
CPE
4
CPE
5
CPE
P/6
HRE-206
Top
Hinge
Top retaining
screw
Wall
Exposed
backplane
(side view)
