DSL Gateway/Router
—
User Manual
Page 4 Total 21 Pages
2 SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
Table 2.1
ITEM
Name
State introduction
Indicator
POWER
A steady Green light means the power connection works properly
DSL
Green, shows DSL line status.
WLAN
Green, Indicates status of connection to the wireless device
Interface
WAN
Connected “ADSL” port of the splitter.
POWER
Power interface, Connect with power adapter.
SWITCH
To turn on / off the power.
RST(Optional)
Press the reset button and turn on the power, then keep pressing the reset button for
6 seconds. Then you can reset the modem with the default settings.
WIRELESS(opt
ional)
Open/Close wireless via pressing the button
2.1.2 SPLITTER SPEC
Table 2.2
Interface
Introduction
ADSL
Connect with the WAN port of the
ADSL Modem
2.2 HARDWARE CONNECTION
Introduction
：
1
、
U
se a telephone cord to connect the LINE port of the splitter with the RJ-11 port (the phone jack) on
the wall.
2
、
Use another telephone cord to connect the ADSL port of the splitter with the LINE port of the ADSL
Modem.
3
、
Use another telephone cord to connect the telephone set with the PHONE port of the splitter.
4
、
Connect Ethernet port of the ADSL MODEM with 10/100BASE-T port of the computer using the
