8.0 Assemblies and Exploded Views
8.1 Introduction
This chapter gives an overview of the main and sub-assemblies and the exploded views of the UEL lights.
8.2 Assemblies
8.2.1 Spare Parts
It is recommended to create a sufficiently large stock of spare parts to maintain the fittings. It will mainly consist of
consumables like lamps, gaskets, etc. Other components that may need replacement, such as front glasses, hardware and
sub-assemblies should be stocked in smaller quantities. The stock should also contain some optical cartridges and complete
fittings of each type.
8.2.2 Ordering code UEL
UM-4020 / AM02-630e, Rev. 2.0, 2020/05/19
29
Copyright
©
ADB Safegate, All Rights Reserved
