ADB Safegate REIL-L, User Manual

Page: 26 / 60

Make sure all components in the enclosures are in place and fastened to the panel assembly. The ON/OFF service switch in
the cabinets should be in the OFF position. If all components are in place, close the door and tighten the bolts.
3.6 Mounting Options
The standard mounting method is with a single leg. See Figure 3 and Figure 4 for mounting instructions. An optional two leg
mounting system is available- see Figure 17 .
Figure 3: L-849V/I REIL Standard Single Leg Mounting Configuration
3.7 Mounting Cabinets
Note
Mount the LED L-849 REIL cabinet directly onto the existing frangible coupling supplied with the assembly.
Figure 4 is given only as guide. Check local codes and the airport project plans and specifications for installation
requirements. See FAA AC 150/5345-51 (Current Edition) for additional mounting instructions. Not shown is the L-867 base
can to house the L- 830 or L-831 isolation transformer for current driven applications.
Figure 4: Single-Leg Control Cabinet
Mounting the Cabinets
To install the L-849 REIL control cabinets, perform the following procedure:
REIL-L
Installation
16
Copyright
©
ADB Safegate, All Rights Reserved