Figure 3: Cutaway View of L-862/L-862E Light Fixture
The cast aluminum head and base assembly can be mounted on a standard L-867 base plate or on a steel stake. Base
mounting is easier to maintain and provides added protection for the equipment. Stake-mounted lights require transformers,
cables, and connectors that are designed for direct earth burial. Refer to
Note
The measurements in Table 1 are taken from the grade to the top of the light fixture.
Table 1: Mounting Heights
Type
Height (in.)
Height (mm)
Standard (FAA minimum)
14
355.6
Standard
24
610
Standard (FAA maximum)
30
762
The L-862/L862E light fixture is available with bidirectional red-green, clear-yellow, red- yellow, green-yellow, clear, red, yellow,
green, and blue lenses.
ERET-CB Incandescent Elevated Runway Edge/Threshold Light
Introduction
8
Copyright
©
ADB Safegate, All Rights Reserved
