100.930UK User Manual
Each pair of AB-5 speakers is supplied with a single 5m length of cable, which should be cut into 2 parts
depending on the distance of each speaker from the amplifier. If longer runs are needed, this cable can
be extended or replaced with an equivalent type that can handle the current (3A min. recommended)
Note: Always connect to the speakers before connecting to the amplifier.
Strip back the
“
+
”
and
“
-
”
wires of the cable at the speaker end and twist the copper conductor strands
on each core so that they stay together and do not fray. Unscrew the respective terminal and insert the
bare wires into the hole in the terminal post. Screw the terminal firmly closed onto the wire, as described
here opposite.
When the amplifier
’
s minimum load impedance is 4
Ω
, just connect one AB-5 speaker to each left or right output of the
amplifier. The amplifier will be able to deliver its maximum possible output into the AB-5 speakers. Be sure that the AB-5
speakers can handle this output, measured in Watts RMS (Wrms)
Series Wiring
If the amplifier
’
s minimum load impedance is 8
Ω
, do not connect the AB-5 speakers unless you are using series wiring,
which would use two AB-5 speakers to make one 8
Ω
load as shown below.
The front grille cloth frames may be removed for cleaning by gently pulling the edges forward starting with the corners
and then moving around the frame, taking care not to bend the frame to the point of damage.
Ensure that the speakers are not overloaded and that the signal from the amplifier is not clipping, both of which and lead
to damage of the amplifier and/or speakers.
After use, turn down the volume control of the amplifier before powering down to avoid any loud pops or sudden noises
through the speakers.
Specifications
Main driver
135mmØ (5.25“)
reinforced paper cone
HF driver
25mmØ (1“) silk dome tweeter
Power handling: rms
50W (each cabinet)
Power handling: peak
80W (each cabinet)
Impedance
4 Ohms (each cabinet)
Connections
Screw ter/-
Mounting hole centres
75mm (2 x M6 threads)
Dimensions
285 x 190 x 167mm (each cabinet)
Weight
2.26kg (each cabinet)
Disposal:
The “Crossed Wheelie Bin”
symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted. Copyright© 2021.
AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.
