background image

 

952.019UK User Manual

 

 

Operation 

 
The pistol grip should be held firmly in one hand with the rear panel facing toward the operator and the 
flare facing away. Alternatively, the megaphone can be slung under the arm using the supplied shoulder 
strap.  
 
Holding the microphone in the other hand and pressing in the push-to-talk button (3) will activate the 
microphone. If the push-to-talk button cannot be pressed in, it may be locked. Slide this button down to 
unlock and press in to talk. If there is no sound, check the batteries are loaded with the correct polarity. 
 
Set the volume control edge roller (5) to the centre of its travel and speak into the microphone (4). 
Adjust the volume control to the required volume level. 
 
Alternatively, the microphone may be hooked onto the rear cover for single handed operation. 
Pressing the trigger switch (1) activates the microphone. 
 
There is also a siren function which emits a loud sweeping tone for warnings or alerts. 
To activate this, slide the siren switch (2) on the rear of the pistol grip to the SIREN position. 
Sliding it back to the TALK position cancels the siren. 
 
Remove batteries if not being used for long periods of time. 

 
 
Specifications 

 

Battery 

12Vdc (8 x D cell, not supplied) 

Rated output power 

30Wmax 

Range 

600m 

Dimensions 

340 x 230mmØ 

Weight 

2kg (no battery) 

 
 
 
 
 

 

 

Disposal:

 The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or  

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.  
The goods must be disposed of according to your local council guidelines. 

 

Errors and omissions excepted. 

 

Copyright© 2016. AVSL Group Ltd.

 

Summary of Contents for 952.019UK






Reviews: