5
WWW.ADAPTIV-MULTIMEDIA.COM
1. Remove the OEM head unit and disconnect the main power Quadlock (A).
2. Disconnect the Pink LVDS connector (B) from the rear of the OEM head unit.
3. Connect this LVDS to the female LVDS OUT on the Adaptiv interface.
4. Connect the LVDS cable supplied (C) back into the OEM head unit,
connect the other end of this cable to “LVDS IN” on the Adaptiv interface.
5. Disconnect the 16 way connector from the rear of the climate panel and connect to (G). Connect (H)
back into the climate panel and refit.
6. Make all required module connections such as DAB, DVBT, HDMI.
7. When not using accessory Bluetooth module, plug 16 pin Bluetooth bypass loom, with the multi-coloured wire
loops, to the 16 pin connector from the main wiring loom.
8. Connect the supplied 24 way power and speaker connector (F) to the Adaptiv
interface, connect the male Quadlock connector (E) into the OEM head unit.
9. Connect the female Quadlock connector (F) into the OEM male Quadlock
connector (A) disconnected in Step 1.