manualshive.com logo in svg

Adaptive BETAbrite prism, Programming Manual

Share
Download
Adaptive BETAbrite prism Programming Manual Download Page 11

 March 15, 2007                                            BetaBrite Prism Programming Manual (1196600101B) 

Installation Instructions

11

Through-panel mounting

The BetaBrite Prism sign can also be mounted through the mounting surface. 

To mount the sign from the back:
1.

Locate the 3 guide holes on the back of the sign.

2.

Drill three holes in the mounting surface with 12.38 inches space between 
them. Do not drill into the sign.

3.

Insert screws (11/64” min., 3/16” max #8 pan head screws for plastic, not 
provided) through the drilled holes into the guide holes on the back of the 
sign.  

NOTE:

 Leave 3/8” to 1/2” of screw exposed to insert into guide holes. No more than 
1/2” of screw should be exposed to prevent damage to sign. .

4.

Screw straight into guide the indicated guide holes

NOTE:

Do not use machine screws. Screws must be equipped to screw into plastic.  

Guide Holes

24.75 inches

13.8 inches

BetaBrite 
Prism sign

11/64” to 3/16” #8 
pan head screw for 
plastic

No more than 1/2” 
of exposed screw

Mounting surface/
panel

Summary of Contents for BETAbrite prism






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands