Step 3:
Insert the speaker with side brackets into the arms of the U-Bracket using the provided
hardware. Do not tighten.
Step 4:
Set the desired tilt angle of the speaker and permanently tighten the side bolts.
Step 5: Install Safety Cables
Install a safety cable directly to the speaker and to the structure, effectively bypassing the
mounting system. Attachment to structure must be able to support 5 times the load of the
speaker and bracket assembly
Installation Guide
UB-QX500
3 Piece U-Bracket Speaker Mount
3" NEO WASHER
INBETWEEN SIDE MOUNTING
BRACKET AND U-BRACKET
1" NEO WASHER
HEX BOLT
3/8-16X1.5 LG (4X)
SPLIT WASHER, 3/8 (4X)
FLAT WASHER, 3/8 (4X)
INSTALL THIS CONNECTION FIRST
ON BOTH SIDES BEFORE THE
LOCKING REAR BOLTS
LOCKING REAR BOLTS
HEX BOLT, 3/8-16X1.5 LG
SPLIT WASHER, 3/8
FLATW ASHR, 3/8
Note to installers:
Due to the wide variety of wall structures, materials and mounting methods, the
installing contractor must exercise proper judgment in selecting the mounting area and
hardware.
As a guide, the installation, when complete should be capable of supporting 5 to 10
times the actual applied load. Always use a backup safety system such as a safety
cable.
To assure a trouble-free installation, read through and follow these instructions
carefully before beginning. If you have doubts about the integrity of the structure
you are mounting to or you are not sure about the proper hardware to use, consult a
structural and/or hardware specialist.
