6
Timer
Turning On
LectroFan
results in continuous play, until the Timer is turned on.
The Timer sets the Unit to play for a minimum of one hour and then gradually
shut Off.
LectroFan
will create a short “dip” in the sound when you press the
Timer Button so you’ll know for sure you have pressed it.
Power-on Default
If you don’t want the Unit to turn On immediately when you first plug it in, you
can disable that function with this procedure:
1. Turn Off the Unit with the Power Button.
2. Press and hold down the Volume Down Button while pressing and releasing
the Power Button.
3. Turn Unit Off. To enable this function again perform a Factory Reset.
Restoring Factory Settings
(Reset)
Turn the Unit Off. Press and hold the Power Button down until
LectroFan
makes a short rising tone (“whoop” sound) and it is Reset. After performing the
Reset the Fan Sound is set to “Large Fan”, the White Noise is set to “White
Noise #1”, the Mode is set to “Fan Mode”, the volume is set to a nominal level,
and
LectroFan
is set to turn On immediately when power is first applied.
Using An External Timer Or Power Strip
If you use a switched power strip or your own external timer to supply power to
your
LectroFan
, be sure to switch
LectroFan
Off and then back On using the
Power Button – only then will
LectroFan
remember your changes!
Timer Button
NOTE: The Timer can be set to
60 minutes by pressing the
Timer Button once. Press the
Timer Button additional times to
add 60 minutes to the time you
would like
LectroFan
to play.