
8
Technical Information
Specifications
SoundStories
10
Speaker Compensation
5-band parametric EQ
Headphone Jack
3.5 mm stereo
Power Requirements
5V, 500 mA DC
How to Restore the Factory Settings
(This sets the unit back to its original condition “fresh out of the box”)
First turn unit Off.
Then
press the Power button and hold until the
panel lights blink (about 5 seconds.)
Trouble Shooting
If your unit exhibits a problem, try the appropriate actions below to
resolve the problem.
SYMPTOM
POSSIBLE CAUSE
SOLUTION
Disconnected power
plug.
Check the power
connection on the bottom of
the unit and at the wall
outlet. Be sure that both are
firmly seated.
Unit is connected to a
switched wall outlet.
Move the unit to an
un-switched outlet.
Faulty wall outlet.
Move to a working outlet
and power on again.
No operation when
power switch is
pressed.
System needs to be
reset.
First power off the unit, then
press and hold the Power
Button for 5 seconds.
Unit is On, but no
sound is heard.
Volume is set too low.
Press or hold Volume Up
button to increase volume.
Other unexpected
behavior.
Try the “factory reset”
procedure. If this
does not resolve the
issue, call Customer
Support.
1) Unplug power adapter
from the AC outlet 2) Press
and hold the Power Button
down while plugging power
adapter back into AC outlet.
3) Continue to hold power
button down for 5 seconds.
4) Repeat 1-3 up to three
more times if unit does not
turn on.
Customer Support
If you have problems or questions, please contact Adaptive Sound
Technologies, Inc. 1-408-377-3411 ([email protected])