Adaptive Micro Systems Beta Brite Programming Manual Download Page 7

Page: 7 / 50

BETA BRITE Programming Manual

General information: Attaching your sign to a surface

Attaching your sign to a surface

Your sign can be mounted on a wall, ceiling, or counter.

NOTE: This sign is intended for

indoor

use only.

NOTE: • Do not mount or attach the power supply to anything.

• Do not let the power supply hang loose.
• Place the power supply on a flat surface where no

chemicals or liquid, such as water, will contact it.

• Plug the power supply into an easily-accessible electrical

outlet no further than 15 feet away from the sign.

Front view

Top view

Wall mount

Power cord

Washer

Attach the mounting brackets to the wall or surface, 24 5/8 inches
(62.7 cm) on center.

Attach the sign to mounting brackets using hardware as shown.

Plug the power cord into the sign and into an outlet.

Screw

Bracket

Lock
washer

Washer

Screw

Bracket

Lock
washer

Summary of Contents for Beta Brite



















































Search results

Summary of Contents for Beta Brite

Reviews:

Related manuals for Beta Brite

Brands by name

Popular brands

Adaptive Micro Systems Beta Brite, Programming Manual

Search results

Summary of Contents for Beta Brite

Reviews:

Related manuals for Beta Brite

Brands by name

Popular brands