March 28, 2006
1179630201
R
EAD
M
E
F
IRST
AlphaEclipse StreetSmart
MULTIPLE MASTER Sign Connection
http://www.adaptivedisplays.com/support/eclipse
© Copyright 2006 Adaptive Micro Systems LLC. All rights reserved.
Adaptive Micro Systems • 7840 North 86th Street • Milwaukee, WI 53224 USA • 414-357-2020 • 414-357-2029 (fax) • http://www.adaptivedisplays.com
Trademarked names appear throughout this document. Rather than list the names and entities that own the trademarks or insert a trademark symbol with each mention of the
trademarked name, the publisher states that it is using names for editorial purposes and to the benefit of the trademark owner with no intention of improperly using the trademark.
The following are trademarks of Adaptive Micro Systems: Adaptive, Alpha, AlphaLert, AlphaNET, AlphaNet plus, AlphaEclipse, AlphaEclipse RoadStar, AlphaEclipse StreetSmart,
AlphaPremiere, AlphaTicker, AlphaVision, AlphaVision InfoTracker, AlphaXpress, Automode, BetaBrite, BetaBrite Director, BetaBrite Messaging Software, Big Dot, Director, EZ KEY II,
EZ95, PagerNET, PPD, PrintPak, Serial Clock, Smart Alec, Solar, TimeNet. The distinctive trade dress of this product is a trademark claimed by Adaptive Micro Systems LLC.
Due to continuing product innovation, specifications in this manual are subject to change without notice.
This QuickStart gives a brief overview of sign installation.
For complete instructions, see the “AlphaEclipse StreetSmart Sign Installation Manual” (pn 1179600101).
Identify the MASTER sign and each SECONDARY MASTER sign. Locate the label on the back of each sign:
Starting with the sign with SERIAL ADDRESS = 1, locate and open the Control Cube’s door:
Remove the communication cable from the Control
Cube:
There are two, labeled communication cables:
Up to 3 SECONDARY MASTER signs
Each sign (except for the last sign) will have a wiring kit in the Control Cube.
+D]DUGRXVYROWDJH
&RQWDFWZLWKKLJKYROWDJH
PD\FDXVHGHDWKRUVHULRXV
LQMXU\
$OZD\VGLVFRQQHFWSRZHUWR
XQLWSULRUWRVHUYLFLQJ
The Control Cube is in the
bottom row on the far
right side of a sign.
Use a 5/32-inch hex tool to open each Control Cube
door locks (circled).
There are 4 to 6 door locks on a sign door.
Each door lock is hexagon shaped:
Do NOT remove any
of the Phillips head
screws.
These screws hold
the LED boards to
the sign door.
5/32-inch
hex tool
Communication
cable
Red
Black
SHIELD
