March 16, 2007
© 2007 Adaptive Micro Systems LLC. All rights reserved
PN 1199611201B
2) Install ooh!Media
A.
Insert the ooh!Media CD into the CD-ROM drive.
If the installation does not start automatically, do the following:
•
Select
Start > Run
.
•
Type
D:/amplayer
(use the correct letter for your CD drive if not
D) and click
OK
.
B.
On the first screen, click the
Install ooh!Media
button and follow
the instructions.
C.
In the Network Setup window, select
Use the Following IP
Address
and enter the values you received from the network
administrator.
D.
Click
Set
.
E.
If the Login prompt appears, enter your password, click
OK
and
then click
Close
in the Network Setup window.
Fill in the following:
•
IP Address
•
Subnet Mask
•
Default Gateway
Select
Native
.
3) Send a test message
A.
Start ooh!Media.
Click
Start > All Programs > ooh!Media > ooh!Media
.
B.
In the lower portion of the ooh!Media window under Run-time
Objects, click the insert new text button.
A new text message box appears in ooh!Media.
C.
Highlight the text inside the message and type an appropriate test
message.
D.
Extend the length of the message by stretching it in the Timeline
(see below).
Extend the message long enough for you to go to the sign and
look at it.
E.
Click the disk icon to save the message.
F.
Name the message and click
Save
.
G.
Click the send message icon to send the message to the sign.
H.
Verify the message appears on the sign.
Time in seconds
